ギガビットルータ NEC UNIVERGE IX2106 中古動作品(2台セット)です
内部/外部簡易清掃済み ファームウェアVer.10.9.11にバージョンアップ済み 初期化済み
IPアドレス:192.168.1.254(初期設定) ユーザー名:なし(初期設定) パスワード:なし(初期設定) Web-GUI(Web設定)使用可能状態
全ポート全二重 1Gbps接続を確認 連続24時間以上の正常動作(IPoE(transix)接続)を確認
<裏面ラベルについて> 清掃中にラベルが破損してしまいました。 製造年、シリアル番号、MACアドレス等、 本体内部情報を基にラベルを複製し、 パウチ加工したものを貼り付けてあります。
電源ケーブルなし
----------<< boot情報 >>---------- (シリアル番号:84TNU00218) NEC Diagnostic Software Copyright (c) NEC Corporation 2001-2023. All rights reserved.
%DIAG-INFO: Starting System POST(Power On Self Test)
DRAM TEST 1: Pass DRAM TEST 2: Pass CPU TEST: Pass PLD TEST: Pass RTC TEST: Pass GE0 TEST: Pass GE1(SW-HUB)1-4 TEST: Pass 1.0 VOLTAGE STATUS: 0.973V Pass 1.35 VOLTAGE STATUS: 1.311V Pass 2.5 VOLTAGE STATUS: 2.418V Pass 3.3 VOLTAGE STATUS: 3.251V Pass 5.0 VOLTAGE STATUS: 4.992V Pass TEMPERATURE STATUS: +18.0degC Pass
NEC Bootstrap Software Copyright (c) NEC Corporation 2001-2023. All rights reserved.
%BOOT-INFO: Trying flash load, exec-image [ix2106-ms-10.9.11.ldc]. Loading: ######################################################################################################################################## [OK]
Starting at 0x20000
Configuring router subsystems (before IDB proc): done. Constructing IDB(Interface Database): done. Configuring router subsystems (after IDB proc): done. Initializing router subsystems: done. Starting router subsystems: done.
All router subsystems coming up.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
WARNING! Administrative username is not configured!! Action: Please configure administrative username.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
NEC Portable Internetwork Core Operating System Software Copyright Notices: Copyright (c) NEC Corporation 2001-2023. All rights reserved. Copyright (c) 1985-1998 OpenROUTE Networks, Inc. Copyright (c) 1984-1987, 1989 J. Noel Chiappa. Router#
(シリアル番号:84TNU00277) NEC Diagnostic Software Copyright (c) NEC Corporation 2001-2023. All rights reserved.
%DIAG-INFO: Starting System POST(Power On Self Test)
DRAM TEST 1: Pass DRAM TEST 2: Pass CPU TEST: Pass PLD TEST: Pass RTC TEST: Pass GE0 TEST: Pass GE1(SW-HUB)1-4 TEST: Pass 1.0 VOLTAGE STATUS: 0.973V Pass 1.35 VOLTAGE STATUS: 1.311V Pass 2.5 VOLTAGE STATUS: 2.431V Pass 3.3 VOLTAGE STATUS: 3.251V Pass 5.0 VOLTAGE STATUS: 4.992V Pass TEMPERATURE STATUS: +18.0degC Pass
NEC Bootstrap Software Copyright (c) NEC Corporation 2001-2023. All rights reserved.
%BOOT-INFO: Trying flash load, exec-image [ix2106-ms-10.9.11.ldc]. Loading: ######################################################################################################################################## [OK]
Starting at 0x20000
Configuring router subsystems (before IDB proc): done. Constructing IDB(Interface Database): done. Configuring router subsystems (after IDB proc): done. Initializing router subsystems: done. Starting router subsystems: done.
All router subsystems coming up.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
WARNING! Administrative username is not configured!! Action: Please configure administrative username.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
NEC Portable Internetwork Core Operating System Software Copyright Notices: Copyright (c) NEC Corporation 2001-2023. All rights reserved. Copyright (c) 1985-1998 OpenROUTE Networks, Inc. Copyright (c) 1984-1987, 1989 J. Noel Chiappa. Router#